Stainless Steel Decorative Mesh

Stainless Steel Decorative and Architectural Mesh

Stainless steel decorative mesh, also known as architectural wire mesh, is woven, cable-supported or formed into a metal surface with a deliberate appearance, used for facades, interior partitions, balustrades and feature screens. The mesh is selected for its pattern and its openness, because those two properties decide how much of what is behind it is seen. XTZ Fence supplies decorative mesh as project sized rolls, panels or framed assemblies, in stainless steel and in the other alloys used for architectural work.

Product Structure and Materials

Pattern, Openness, Direction and Edge Support

A decorative panel is defined by four decisions. The pattern and the openness set how much light passes through and whether the surface reads as a texture or as a screen. The panel direction decides the orientation of the pattern on the wall or ceiling. The edge support, whether that is an edge cable, a frame or a flat bar termination, carries the load and has to match the panel. The alloy and finish are then selected against the environment.

• Pattern and openness: Selected for the required transparency
• Panel direction: Confirmed against the drawing
• Maximum module size: Set by the panel structure and support
• Edge support: Edge cable, frame or flat bar termination
• Wire diameter: Custom Specifications, confirmed per project
• Material: Stainless steel, or an architectural alloy specified by the design
• Surface finish: Polished, brushed or coloured to the design
• Supply form: Project sized rolls, panels or framed assemblies

Applications and Selection

Applications for Decorative Mesh

Decorative mesh is used wherever a surface has to do a design job as well as a practical one. Facades use it as a sun screen or a semi-transparent cladding, where the pattern controls how much of the interior is visible from outside. Interior partitions, ceiling cladding and lobby screens use it to separate a space without closing it. Balustrades use it as a visual infill where a solid panel would close the view. It is also used as a backlit feature element, where the texture of the mesh is what the light is meant to pick out.

Decorative Mesh in Relation to Other Stainless Products

Decorative mesh is a surface product chosen for its appearance and its openness, not for load carrying. Where a rigid, grip resistant open panel is needed for guarding, our stainless steel security fence uses flat bar pickets instead of a woven pattern, and where the requirement is a punched sheet with a precise hole pattern, our stainless steel perforated sheet covers the punched form. Where the requirement is a woven surface for a tensioned infill, our stainless steel cable mesh covers rope-based constructions, and where a formed open panel is wanted, our stainless steel expanded metal mesh covers the slit and stretched form.

Choosing Pattern, Openness and Edge Support

Start from the viewing distance and the lighting. A close weave reads as a solid texture and suits privacy and ceilings, while an open weave keeps the sight lines and works where light has to pass through. The pattern then has to be supported, so the edge cable, frame or flat bar termination is chosen to carry it, and the maximum module size follows from that. Send the drawings, the required openness, the panel direction, the alloy and finish, the quantity and the destination to receive a project-specific quotation. Related products and components: laser cut stainless steel tubes and decorative laser cut stainless steel tube. For further technical reading, see Green Wall Trellis Mesh and Balustrade Infill Mesh.

Frequently Asked Questions

Q: What is stainless steel decorative mesh?

A: Stainless steel decorative mesh, also known as architectural wire mesh, is woven, cable-supported or formed into a metal surface with a deliberate appearance, used for facades, interior partitions, balustrades and feature screens. It is selected for its pattern and its openness, because those two properties decide how much of what is behind it is seen.

Q: How do I choose the pattern and openness for a feature wall?

A: Start from the viewing distance and the lighting. A close weave reads as a solid texture and suits privacy and ceilings, while an open weave keeps the sight lines and works where light has to pass through. The maximum module size then follows from the edge support chosen to carry the panel.

Q: What edge support does decorative mesh need?

A: An edge cable, a frame or a flat bar termination, depending on the panel and how it is fixed. The edge support carries the load and has to match the panel structure, so it is confirmed with the drawings rather than chosen separately.

Q: Can decorative mesh be used for balustrades?

A: Yes. Decorative mesh is used as a visual infill where a solid panel would close the view. Where a structural balustrade with glass infill is required instead, that is a different product with posts, clamps and a handrail.

Q: Which alloys and finishes are available?

A: Stainless steel and the architectural alloys used for decorative work are both available, and the finish can be polished, brushed or coloured to the design. The alloy and the finish are confirmed with the drawings before production.

Request a Custom Quotation

Request a Custom Quotation – send the drawings, the required openness, the panel direction, the edge support, the alloy and finish, the quantity and the destination, and XTZ Fence will confirm the specification for your project.